2. Keep enough seeds, fertilizers, and vulnerable mechanical parts to avoid delaying planting and delaying farming.
3, the seeds must be dry and clean, not mixed with debris such as straw and stones, so as not to block the seed outlet, affecting the quality of sowing. Seeds must be rigorously selected and the fertilizer must be clean when it is sown, otherwise it will affect the quality of sowing.
4. Put the seed fertilizer on the appropriate place in the ground to avoid delays when adding seeds and fertilizers.
Second, sowing precautions 1, sowing machinery in the operation to avoid parking. When the plant must be stopped, in order to prevent the phenomenon of “broken bar†in the lack of seedlings, the planter should be raised and backed up for a certain distance before planting. When descending the seeder, make the tractor run slowly. The seed drill must not be retracted when the opener is in the ground to prevent clogging or damage to the opener.
2. When the land is turned, the planter should be raised to cut off the power of the metering device and the fertilizer feeder, and raise the rowing and opener.
3. The manipulator shall observe the operating conditions of the seeder at any time during the operation, and shall pay particular attention to whether the seeding device is arranged for seeding; whether the row fertilizer device is used for rowing; whether the input and the fertilizer pipe are blocked or not; whether the disc opener is rotated; Whether the overburden presser is normal, whether the rowing and opener is normal, and whether there is enough seed and fertilizer in the seed box and fertilizer box.
4. After sowing a crop, it is necessary to carefully cleanse the seed box so as to avoid seed failure caused by mixed seeds, causing seed wastage and causing difficulties and inconvenience to the field management in the future. After the sowing is completed, clean the fertilizer tanks in time to prevent corrosion and rust.
5. When sowing seeds with pesticides, wear gloves, masks, goggles and other protective tools. The remaining seeds should be properly handled in a timely manner and should not be thrown or littered in order to avoid environmental pollution and harm to humans and animals.
Imported French lens
mould Die-casting Eight edge type Revolving arm
Each LED can be replaced individually, which guarantees maximum economy.
Configuring lightweight balance arm suspension system ,six groups universal joint linkage ,mobile, lightweight positioning and stablibity .A 360°all-round design ,can meet the need for surgery in different heights and angles.
color temperature constant, soft, very close to the natural sun light.
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
LED Operating Light,Portable Operating LED Light,Surgical Operating LED Light,LED Surgical Light
Shandong Kang'erjian Medical Technology Ltd. , http://www.kangerjian-medical.com