First, look at the water quality. The moisture required for flowers and trees is better than unpolluted natural precipitation. River water, pool water, and rainwater are the preferred watering waters. The tap water used in daily life is added with a scavenger in the purification process and should not be directly watered. The boiled egg water, the fermented rice water, and the exchanged fish culture water are rich in nutrients and are very good watering water.
Second, look at the water temperature. Hua Tuo said it well: "The water temperature is moderate and the water temperature is too cold to catch a cold." When the difference between the soil temperature and the water temperature is large, watering can not be done so as not to damage the root system. Some potable water can be stored in pots or shallow water tanks near potted flowers, which is conducive to the natural adjustment of water temperature.
Third, look at the time. The temperature varies throughout the year, and the amount of water used for watering depends on the season. Most of the flowers in the dormant state, as long as the soil can be kept slightly wet.
Fourth, look at flower pots. Watering pots should also be based on the size of the pot, its depth and the texture of the pot.
Fifth, look at flowers and trees. Different flowers need different amounts of water, so watering varies from flower to flower.
Seed & grain cleaning/ processing plant is a whole set production line made up of different machines. Usually, the seed grain cleaning processing plant includes equipment from seed pre-cleaning, fine cleaning, until seed coating, packing.
Grain seed harvested from ground contains much impurity as dust, straw, husk, stems, lumps, stones. To increase grain seeds market value, the farmers/distributors need clean grain seeds before sell. Our grain cleaning plant offers solution to effectively remove above impurity. Farm equipment as seed huller, pre-cleaner, seed cleaner & grader, destoner will do the job. The huller/de-awner removes seeds' surface husk / awn. After then, seed cleaner & grader will remove the dust, husk, smashed stems by air suction cleaning. Meanwhile, it will remove the oversize and undersize impurity by sieve grading. After air screen cleaning, the destoner will separate the stones, lumps, glass and Other heavy impurity. To remove the stones and clods, we also have magnetic separator, it is used to remove the magnetic clods and other magnetic impurity. After grain being cleaned by above procedures, customers normally add gravity separator to remove bad, immature, eaten, sicken seeds. Gravity Separator will help to find the healthy seeds. In order to improve the seeds germination rate, seeds coating machine is essential. Seed Treater will coat the chemical, fertilizer film on seeds' surface. The chemical will protect the seeds underground from worm's eaten and prevent diseases. The fertilizer will offer rich nutrition during seeds budding stage. Finally the cleaned grain/ seeds are being weighted and packed into bags.
Above is typical grain seed cleaning, processing procedure introduction. For different customers' demands, raw material requirements, we will customize the specific suitable plant design. For example, if clients clean beans, we will recommend extra Bean Polishing Machine to remove soil/dust on bean surface. If client require a high cleaning rate, the color sorter, hands picking belt will be added. We provide customized plant solutions basing on different cleaning situation.
Up to now, we have clients over 100 countries, and we built plants
over 20 countries. We have engineer oversea on -site installation and training
service. Our goal is to make sure the Grain Seed Cleaning Plant run well and client
master the operation tips. It is our aim to help clients get satisfied grain
seed cleaning effect.
Seed & Grain Cleaning / Processing Plant
Seed Cleaning Plant,Grain Seed Cleaning Plant,Grain Procesing Plant,Grain Cleaning Plant
SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com