The circulatory system and the humidification system are important components of the constant temperature and humidity test chamber. The following Haida instruments explain these two parts in detail:
The constant temperature and humidity test chamber needs to clean the evaporator regularly, because the cleanliness level of the test workpieces is different. Under the forced air circulation, a lot of dust and small particles will be condensed on the evaporator, so it should be cleaned regularly for some cleanliness. Users with higher requirements should always clean.
Waterway and humidifier cleaning, if the waterway is not smooth, the humidifier scaling will cause the humidifier to dry, which can damage the humidifier. Waterways and humidifiers must be cleaned regularly. Also insist that the temperature is set near the ambient temperature after each test, and the power is turned off after about 30 minutes of work, and the inner wall of the working chamber is wiped clean. When the long-term shutdown is not used, the product should be energized periodically every half month. Cleaning and maintenance of the constant temperature and humidity test chamber circulation system and humidification system