Summer corn field herbicide

First, after harvesting wheat, if there is a large amount of weeds in the ground, we must use the herbicide. Glyphosate is a systemic herbicide that does not show any effect in the early stage after spraying, but about two weeks later, weeds will die from the roots.
Second, the herbicides uncovered in enclosed weeds include the mixture of ethazione, yucacao, and thiamine. In general, 200 grams per mu is used, and 45 kg of water is used. If the amount of water is small, the drug sealing layer is thin, and some highly resistant weeds can easily drill out the sealing layer, resulting in poor control efficiency. However, the amount of water can not be too large, otherwise the effective concentration of the agent will decrease, and no blocking effect will be achieved.
3. When the above-mentioned closed herbicides come into contact with cotton, peanuts, soybeans, and vegetables, they will have different degrees of phytotoxicity. Therefore, when spraying the above herbicides, the following principles must be followed: Spray as much as possible without wind, and prevent the medicaments from falling into the wind. Floating to vegetables, peanuts and other crops; spraying after lowering the sprayer to minimize the drift of the sprayer; wearing a protective cover and directional spray before the spray head.
4. In recent years, due to the poor effect of using enclosed herbicides on individual plots, some farmers’ friends, such as corn and weeds, have grown out and weeding with herbicides such as Yule, Yuheng. However, farmers' friends should be reminded that the best time for prevention and control is when 4 to 5 leaves of corn and 3 to 4 leaves of weeds are used. If the corn is used for control after 7 leaves, it may cause injury.
5. Insect pests may occur in corn fields. Mixtures of insecticides and herbicides can be used. However, with herbicides Yu Nongle and Yu Hengshi, pesticides cannot be mixed with organophosphorus pesticides to avoid phytotoxicity.

Nanomicro Tech produces light diffusion microspheres based on patented technology developed in-house.  The products include monodisperse microspheres of poly(methyl methacrylate) (PMMA), polystyrene (PS), poly(methyl methacrylate-co-styene) (P(MMA/S)), and silicone.  These monodisperse light diffusion microspheres have perfect roundness, precise size, and very narrow particle size distribution.  With their outstanding powder flow properties, high dispersibility in application media, good thermostability and weatherability, light diffusion microspheres from Nanomicrotech have been widely used in many different fields such as LED lighting fixtures, LCD light diffusion sheet and film, cosmetics,  paint, coatings, and plastic additives.

Light Diffusion Particles

Light Diffusion Particles,Light Diffusion Microspheres,Light Diffusion Particles Used In Lcd/Led Light

Suzhou Nanomicro Technology Co., Ltd. , https://www.nanomicro-technology.com