(1) Apply 1 kg of nitrogenous fertilizer urea to foliar, 100 kg of clear water to dissolve 1% aqueous urea solution; if there is defertilization during the middle and late stages of peanut growth, or continuous rainfall during the growing period of peanuts, the water in the soil, and the nutrients in the root system is difficult to absorb, Sprayable, spraying 60kg urea aqueous solution per acre.
(b) Foliar application of phosphorus fertilizer Peanuts have strong absorption capacity for phosphorus. Spraying superphosphate solution in the middle and later stages of fertility can increase the yield of pods. 2-3kg superphosphate, 100kg water, stirring soaking, after a day and night, take the supernatant application, generally every 7-10 days spray once, and even spray 2-3 times, spray 60kg per acre. Be careful to remove the residue completely so as not to damage the blade.
(3) Nitrogen and phosphorus may be mixed in a peanut field that is deficient in phosphorus and lacks nitrogen. A mixture of 1% urea and 2% of superphosphate may be sprayed, which is a good method and the effect is good. Preparation method: 100 kg of 2% superphosphate Urea lkg is added to the calcium aqueous solution.
(4) The foliar application of potash fertilizer is generally formulated with plant ash. The preparation method is to take 5-10kg of ash without rain, add 100kg of water and stir well, immerse for 12-14 hours, take the clear solution, which is 5%-10% of the ash leaching solution, about 60kg per spraying. An aqueous solution of potassium sulfate or potassium chloride may also be used. The preparation method is to add potassium sulfate or potassium chloride 2 kg in 100 kg of clean water, and dissolving and stirring to prepare a 2% solution of potassium sulfate or potassium chloride, each spray 60 kg per acre. .
(5) Phosphorus and potassium combined to take 5kg of hay ash, add 40-50kg of water to soak, take 2g of calcium phosphate, and soak it in the soaking solution. Mix thoroughly and filter out the clear solution after a long time. Add water to the remaining solution to soak it for 20k. , And then combined two times the filtrate, the water to 100kg, that is, the method of production of potassium dihydrogen phosphate, spraying 60kg per acre, spraying two times that there is a significant increase in production.
(6) Problems of Attention
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
(b) Foliar application of phosphorus fertilizer Peanuts have strong absorption capacity for phosphorus. Spraying superphosphate solution in the middle and later stages of fertility can increase the yield of pods. 2-3kg superphosphate, 100kg water, stirring soaking, after a day and night, take the supernatant application, generally every 7-10 days spray once, and even spray 2-3 times, spray 60kg per acre. Be careful to remove the residue completely so as not to damage the blade.(3) Nitrogen and phosphorus may be mixed in a peanut field that is deficient in phosphorus and lacks nitrogen. A mixture of 1% urea and 2% of superphosphate may be sprayed, which is a good method and the effect is good. Preparation method: 100 kg of 2% superphosphate Urea lkg is added to the calcium aqueous solution.
(4) The foliar application of potash fertilizer is generally formulated with plant ash. The preparation method is to take 5-10kg of ash without rain, add 100kg of water and stir well, immerse for 12-14 hours, take the clear solution, which is 5%-10% of the ash leaching solution, about 60kg per spraying. An aqueous solution of potassium sulfate or potassium chloride may also be used. The preparation method is to add potassium sulfate or potassium chloride 2 kg in 100 kg of clean water, and dissolving and stirring to prepare a 2% solution of potassium sulfate or potassium chloride, each spray 60 kg per acre. .
(5) Phosphorus and potassium combined to take 5kg of hay ash, add 40-50kg of water to soak, take 2g of calcium phosphate, and soak it in the soaking solution. Mix thoroughly and filter out the clear solution after a long time. Add water to the remaining solution to soak it for 20k. , And then combined two times the filtrate, the water to 100kg, that is, the method of production of potassium dihydrogen phosphate, spraying 60kg per acre, spraying two times that there is a significant increase in production.
(6) Problems of Attention
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
(3) Nitrogen and phosphorus may be mixed in a peanut field that is deficient in phosphorus and lacks nitrogen. A mixture of 1% urea and 2% of superphosphate may be sprayed, which is a good method and the effect is good. Preparation method: 100 kg of 2% superphosphate Urea lkg is added to the calcium aqueous solution.(4) The foliar application of potash fertilizer is generally formulated with plant ash. The preparation method is to take 5-10kg of ash without rain, add 100kg of water and stir well, immerse for 12-14 hours, take the clear solution, which is 5%-10% of the ash leaching solution, about 60kg per spraying. An aqueous solution of potassium sulfate or potassium chloride may also be used. The preparation method is to add potassium sulfate or potassium chloride 2 kg in 100 kg of clean water, and dissolving and stirring to prepare a 2% solution of potassium sulfate or potassium chloride, each spray 60 kg per acre. .
(5) Phosphorus and potassium combined to take 5kg of hay ash, add 40-50kg of water to soak, take 2g of calcium phosphate, and soak it in the soaking solution. Mix thoroughly and filter out the clear solution after a long time. Add water to the remaining solution to soak it for 20k. , And then combined two times the filtrate, the water to 100kg, that is, the method of production of potassium dihydrogen phosphate, spraying 60kg per acre, spraying two times that there is a significant increase in production.
(6) Problems of Attention
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
(4) The foliar application of potash fertilizer is generally formulated with plant ash. The preparation method is to take 5-10kg of ash without rain, add 100kg of water and stir well, immerse for 12-14 hours, take the clear solution, which is 5%-10% of the ash leaching solution, about 60kg per spraying. An aqueous solution of potassium sulfate or potassium chloride may also be used. The preparation method is to add potassium sulfate or potassium chloride 2 kg in 100 kg of clean water, and dissolving and stirring to prepare a 2% solution of potassium sulfate or potassium chloride, each spray 60 kg per acre. .(5) Phosphorus and potassium combined to take 5kg of hay ash, add 40-50kg of water to soak, take 2g of calcium phosphate, and soak it in the soaking solution. Mix thoroughly and filter out the clear solution after a long time. Add water to the remaining solution to soak it for 20k. , And then combined two times the filtrate, the water to 100kg, that is, the method of production of potassium dihydrogen phosphate, spraying 60kg per acre, spraying two times that there is a significant increase in production.
(6) Problems of Attention
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
(5) Phosphorus and potassium combined to take 5kg of hay ash, add 40-50kg of water to soak, take 2g of calcium phosphate, and soak it in the soaking solution. Mix thoroughly and filter out the clear solution after a long time. Add water to the remaining solution to soak it for 20k. , And then combined two times the filtrate, the water to 100kg, that is, the method of production of potassium dihydrogen phosphate, spraying 60kg per acre, spraying two times that there is a significant increase in production.(6) Problems of Attention
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
(6) Problems of Attention1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
1. It is necessary to determine the fertilization time according to the growth condition and growth period of peanuts, and it should generally be applied at the later stage of fertility.2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
2. To choose no windy cloudy days, or spray on sunny days before 9:00 and after 4:00 pm to increase the amount of leaf absorption and prevent damage to the leaves. After 4 hours of spraying, rain should occur.3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.
4. When spraying, spray evenly, spray the front and back of the leaf.
3. To strictly control the spraying concentration, the concentration of large and easy to damage the leaves, causing damage.4. When spraying, spray evenly, spray the front and back of the leaf.
4. When spraying, spray evenly, spray the front and back of the leaf.
Small Linear head 10MHz/14MHz, 20/30/40/55mm, 25mm
Convex Probe frequency and scan depth, scan angle, head radius: 3.5MHz/5MHz, 90/160/220/305mm, 60°, 60mm
-Image Adjust: BGain, TGC, DYN, Focus, Depth, Harmonic, Denoise, Color Gain, Steer, PRF
-Working system: Apple iOS and Android, Windows
Precision medicalvisualization tool, first aid quick examination, basic examination, wireless ultrasound probe is not only help the medical workers to improve working efficiency, reduce labor intensity and working pressure, but also improve diagnostic confidence and treatment.Minimize diagnostic and treatment errors, complications, sequelae, medical accidents and disputes
Application directions
1. Visualization tools: invasive intervention guide, surgical and therapy guidance.
2. Emergency inspection: ER, ICU, Wild First Aid, battlefieldrescue.
3. Preliminary examination: Ward Inspection, primary clinicexamination medical examination, health screening,home care, family planning, etc.
4. Remote diagnosis, consultation, training: works on smart phone or tablet, easy telecommunications.
Applicable Clinic
Anaesthesia, pain, ICU, urology, nephrology, cardiology, rehabilitation, orthopedics, gynaecology, reproductive, obstetrics, neonatology, pneumology, gastroenterology, hepatological surgery, general surgery, vascular surgery, thyroid surgery, skull surgery, neurology, transplantation, ophthalmology, dermatology, emergency, nursing, inpatient, physical examination, and ER ambulance, primary care, family planning centers, family medicine, home care, nursing home, prisons, plastic surgery, small needle knife/acupuncture treatment clinic, sports medicine, battle field ambulance, disaster ambulance, etc.
Example of usages
Puncture/intervention guide: thyroid ablation, neck vein puncture, subclavian vein puncture, and neck and arm nerves, canal of arantius, spine puncture, radial vein injection, percutaneous renal surgery guide, hemodialysis catheter/thrombosis monitoring, abortion, bile duct puncture, hydropsarticuli extraction, pain therapy and cosmetic surgery, urine catheterization. Emergency inspection:internal bleeding, Pleural effusion, pneumothorax, Atelectasis of lung, Temporal / posterior auricular fistula, pericardial effusion. Daily inspection:thyroid, breast, liver cirrhosis, fatty liver, prostate/pelvics, stroke screening, retinal artery, uterus, follicular monitoring, fetus, musculoskeletal, podiatry, fractures, varicose veins, spleen, bladder/urinary function, urine volume measurement.
Single Head Ultrasound,Portable Linear Ultrasound,Breast Ultrasound Portable,Wireless Ultrasound
Guangzhou Sonostar Technologies Co., Limited , https://www.sonoeye.com