1. In addition to scaling, place two large, peeled, and seeded loofahs in a water tank and replace them regularly. This helps keep the tank clean and prevents buildup. Make sure to rinse the loofahs thoroughly before each use.
2. If there is a lack of elasticity in the piston ring, you can try using a new standard ring of the same type. To check the old ring, place it vertically along the circumference and position both ends horizontally. Press the ring with your hands. If the new ring opens and closes easily while the old one remains closed, it means the old ring is still flexible and can be reused.
3. For repairing broken paper mats, apply a small amount of butter on both sides of the damaged pad. Then cut two thin white papers of the same size as the original and stick them onto both sides. Place the repaired mat back into the machine and tighten the nuts to ensure a secure fit and prevent leaks.
4. To remove air from the oil pump of an S195 diesel engine, use a medical waste needle to fill the pump inlet with oil. Once filled, turn the oil pump manually until oil starts to come out from the outlet. This ensures that all air is expelled and the pump functions properly.
5. Oil leakage at the connection between the high-pressure fuel pipe and the injector or fuel valve can occur due to wear on the contact surface. To fix this, cut a small round piece of copper from a discarded cylinder gasket, make a small hole in the center, and place it between the convex head and concave pit to restore the seal.
6. Cleaning the iron filter in an air filter can be challenging. If the filter element is stained with diesel oil, you can burn it off by carefully igniting the oil. After the fire is extinguished, gently tap the core with a wooden stick to help the burnt residue fall away, leaving the filter clean and functional.
7. Removing dirt from a fine filter can be tricky. To do this, apply a layer of butter on the inner wall of the rotor. The dirt will stick to the butter, and once the paper is removed, the dirt comes off with it, leaving the filter clean and ready for use.
8. Bending copper tubing can be difficult due to its hard nature. To make it easier, heat the area you want to bend using charcoal until it turns red, then quickly cool it in water. This softens the metal, making it easier to shape without breaking.
9. Removing the outer retaining ring from a deceleration gear can be tough. For the Dongfeng-12 hand-drag model, use a wire to pass through the small hole in the ring after tightening. Secure the other end with a screwdriver, pull tightly, and rotate the drive wheel back and forth several times to loosen and remove the ring.
10. To prevent tire slippage, take two tablespoons of talcum powder. Remove the valve core, let the air out of the inner tube, and use a funnel made from hard paper to insert the valve. Pour the talcum powder into the inner tube. Once the powder is inside, remove the funnel. After inflating the tire fully, the talcum powder will spread evenly and cover any small holes, preventing air loss and improving grip.
Frozen Tuna,Frozen Tuna Sashimi,Tuna Head Frozen,Peeled Tuna Frozen
Zhejiang Ocean Family Co., Ltd., , https://www.ocean-family.com